Tenor Sax Dent Barrel
$50.60
In stock
Sized to work in all areas of the body tube, the tenor sax dent barrel is heavy enough to rebound up pushed in posts but shaped to provide great control in working out smaller dents and creases too. Slotted to allow the dent barrel to pass through the neck end of the saxophone without removing the body octave pip or removing the bow.
An deal shape for pushing for rebounding dents out of an Tenor saxophone body tube.
Machined with smooth radius edges from rust-resistant magnetic stainless steel. Slotted to allow the dent barrel to pass through the neck end of the saxophone without removing the body octave pip or removing the bow. Sized to work in all areas of the body tube, this dent barrel is heavy enough to rebound up pushed in posts but shaped to provide great control in working out smaller dents and creases too. The tenor sax dent barrel is a great match with MusicMedic’s 3 foot or 4 foot straight dent rods. 1/2-13 threads are compatible with many other dent removal tools.
- Thread: 1/2-13
- Small diameter: 22.5.mm (0.885 inches)
- Largest center diameter: 26.6mm (1.05 inches)
- Length: 63.5mm (2.5 inches)
- Octave Pip Slot: 6.4mm wide x 3.9mm deep (0.25 x 0.154 inches)