Keywork Adjustment

Our Pivot Screw Reamers feature a cutting surface machined from hardened tool steel for long life. The cutting surface on each tool matches the exact taper of the pivot screw used on the instrument, and the tools will cut in both directions! Learn More

These Replacement Hinge Tube Cutter Pilots are a half inch in length (12mm) with 1-72 threads. These can be used to replace the smallest pilots from the Hinge Tube Cutter Set or use wherever a small pilot is needed for key work. Learn More

Tap and Die accessories Learn More

Taps and Dies individual metric sizes. Learn More

Taps and Dies, individual standard sizes Learn More

The Flute Post Moving Lever has been redesigned with a light weight aluminum handle for a well-balanced precision tool that feels good in your hands. 

Learn More

Keep commonly used pad slicks and levers right at your finger tips to quickly organize your bench top! Learn More

Our artisan pad slicks were designed for professional technicians who do padding day in and day out. These are made from stainless steel, with an aircraft aluminum handle that is well balanced and feels good in the hands. The pad slick itself is offset from the handle to allow clearance around resonators, allowing you to easily adjust the back of a pad. They come in three sizes to give you plenty of working surface for various size woodwind pads and instruments. Learn More

This compact 2-in-1 tool will streamline your open hole flute padding.  It tackles two common problems that occur during the padding process: bushings (or grommets) getting spread, and pad cup chimneys getting crushed in. 

Learn More

Replacement Hinge Tube Cutters Learn More

These levers are designed to adjust the angle between key arms, key feet and compound keys on saxophone. Precise adjustment of the key and arm angles without changing key cup orientation is easy using this tool.

Learn More

High quality double sided steel spring hook with a textured steel grip. Each end of the hook is grooved for pushing needle springs into place and hooked for pulling springs onto cradles. Comes in a handy carrying case. The Small Tip Double Sided Spring Hook is made to get in between keys and the body on smaller woodwind instruments, including flutes, soprano/sopranino saxes, piccolos, and oboes.

Length: 157 mm. or 6.18 in. Learn More

Key wedges work very well to hold keys closed during repair. Key wedges are useful when holding keys closed to check for and remove leaks in woodwind instruments, as well as wedging keys closed overnight to seat pads. They can also be used to hold keys shut during shipping.

Package of 25 wedges Learn More

Our Ultimate Tap & Die Set includes the most popular Metric AND Standard sizes for band repair! This allows you to repair or make parts for countless instrument brands. This is the most complete set available for the thread sizes we encounter in the musical repair trade.

Learn More

The Ultimate Post CounterBore Set will allow you to counter bore posts for most tapered pivot screws in woodwind keys at any angle.

Learn More