Specialized Woodwind Tools

MusicMedic Battery Bank is a must have for any of your charging needs and using our Flexi-Nova leak light when regular A/C power is not an option. Learn More

Our Pivot Screw Reamers feature a cutting surface machined from hardened tool steel for long life. The cutting surface on each tool matches the exact taper of the pivot screw used on the instrument, and the tools will cut in both directions! Learn More

These Replacement Hinge Tube Cutter Pilots are a half inch in length (12mm) with 1-72 threads. These can be used to replace the smallest pilots from the Hinge Tube Cutter Set or use wherever a small pilot is needed for key work. Learn More

The Ultimate Woodwind Work Fixture is a revolutionary approach to work fixtures and jigs, with horizontal and vertical orientations, many rotation options, movable locking shuttles, and attachments that will accept every woodwind instrument from piccolo to double reeds to baritone saxophone!

Learn More

Tap and Die accessories Learn More

Taps and Dies individual metric sizes. Learn More

Taps and Dies, individual standard sizes Learn More

Our Flute Pad Iron is thoughtfully designed with years of research to create a tool that will cover the widest range of flute brands. Learn More

The Blue Monster PTFE tape is hands down the best Teflon tape we’ve ever seen. This tape is stronger, thicker and easier to use then traditional Teflon tape. Learn More

Because the Leak Tester is so sensitive, it can be used after the leak light and feeler gauge as a secondary leak tester. It is also an excellent demonstration tool for your customers. Using the Leak Tester, you can quickly test an entire flute before doing leak work, then test it again after the work is complete. It is also possible to use the Leak Tester to test for leaks in individual pads on flute, wooden instrument bodies, brass tubing or any part of any instrument that can be sealed on both ends.

(MusicMedic.com Leak Tester Instructions can be found here)

Learn More

Keep commonly used pad slicks and levers right at your finger tips to quickly organize your bench top! Learn More

Our artisan pad slicks were designed for professional technicians who do padding day in and day out. These are made from stainless steel, with an aircraft aluminum handle that is well balanced and feels good in the hands. The pad slick itself is offset from the handle to allow clearance around resonators, allowing you to easily adjust the back of a pad. They come in three sizes to give you plenty of working surface for various size woodwind pads and instruments. Learn More

Flexi-Nova Leak Light System 2.0-

• 10, 20 and 32 inch flexible LED leak light- solid band of lights on both sides with a 3 foot USB cord.
• 3 foot USB extension cord with switch (sold separately) for easy bench use. 
• 5 watt- 5 volt international voltage USB power supply- with interchangeable plug styles (sold separately).

 

Learn More

A super high quality tool for lifting open hole flute bushings without tearing or distorting the pad underneath.

Learn More

This Feeler Gauge Assortment for your padding work. Included are 2 light weight handles with O-rings and thicknesses of feelr material:

Silver: 0.0005"

Amber 0.001"

Red 0.002”

Green 0.003”

Learn More