Adhesives

As long as there have been woodwind pads, technicians have trusted shellac to hold them in place. The difficulties in using stick shellac are well known- drips, burns, burnt keys and broken shellac sticks are common problems associated with heating shellac over a flame. The Z-Gun (patent pending) takes the hassle out of using shellac to install woodwind pads. Learn More

MusicMedic.com shellac sticks are the finest available. Many technicians and players feel that a firm shellac which cools to a hard state improves the tone of the instrument. We offer 3 types of shellac for pad installation- Two synthetic sticks and one traditional natural light amber stick. Learn More

Create a durable, water-resistant bond instantly with our Contact Cement. This powerful adhesive is an industry standard that provides a permanent bond between two materials. We use this product daily in the Sax ProShop to securely attach materials such as Cork, Tech Cork, Felt, Teflon, Ultra-Suede, Sorbothane, and Neoprene to key feet, tone holes, tenons, necks, and more! Use the brush provided to evenly coat each surface with Contact Cement. Then let both parts sit for 5-10 minutes until they are almost completely dry to the touch. Once the contact cement has dried, carefully press the two surfaces together. Once the coated pieces go together they will instantly form a permanent bond.

Sold in two convenient sizes with brush caps.

Always be sure to seal your contact cement bottle tightly after use as continued exposure to air will cause it to thicken and dry up. Thin with Toluene.

Specs:

1/2oz Brown Glass Bottle with Brush Cap.
4oz Metal can with Brush Cap

Due to the hazardous nature of this product, we can only ship this via UPS Ground within the United States. If you order this product with other items we will ship all items together via UPS Ground unless you request to receive them separately. 

Learn More

Our Water-Soluble Shim and Bladder Glue is a dual purpose adhesive for flute work. One use is for adhering shims to the back of the pad so that they stay in place each time the pad is reinstalled. The second purpose is to aid in re-skinning a flute pad. Learn More

Our White Adhesive Pellets offer a firmer alternative to the yellow pellets. 

Learn More

• Epoxy: 2 NON-SAG Extra Fast Setting
• Epoxy: General Purpose

Learn More

We love the Z-Plug because it allows you to get every drop of shellac out of the cartridge without waste. In our industry, we focus a lot on dent removal, and we certainly weren’t going to let a little ding slow us down! Learn More

Rubber Toughened- 1/2 oz bottle Learn More

Not all cyanoacrylate adhesives are created equal! High quality cyanoacrylate adhesives (CAs) used properly, form bonds that in many cases are stronger than the material that is being adhered. MusicMedic has chosen these different formulations for their strength, versatility, purity and long shelf life. Get control over your glue! Extension tips and applicators help you get the CA to where you need it without making a mess or wasting glue. Learn More

Barge is a technician's best friend. Coming in tubes of 2 oz. or 3/4 oz, you'll find a variety of uses for this handy cement. Adheres to rubber, glass, cork, leather, and metal.  

Due to the hazardous nature of this product, we can only ship this via UPS Ground within the United States. If you order this product with other items we will ship all items together via UPS Ground unless you request to receive them separately. 

Learn More

Prevent drips of shellac on your work bench with the Z-Gun Drip Tip. Lightweight, it snaps right into place, and prevents a messy workspace. Learn More

Replacement Parts included are: Plunger and Handle Learn More

MusicMedic.com hot glue sticks are the finest hot glue sticks available for installing woodwind pads. Our sticks are chosen for their medium melting point and superior adhesion. Install any woodwind pad with our hot glue stick including the Jim Schmidt Pads. Learn More

1, 4 and 8 ounce packages of adhesive pellets used to install Flute and Clarinet Pads. Learn More

5 Minute epoxy is excellent for jobs that require a quick set time. We often use this epoxy to coat and build palm key risers on saxophones. It is flexible and does not shrink when it sets. Learn More