Our Economy Flute Body Mandrel is made from precision ground tool steel. It is very hard to provide a long-lasting work-piece. The rounded end and rounded hip will help prevent damage. The workable space is 15”, or the entire length of a flute body, and 3” is allocated for securing in a vice and indicated by a line. Use the mandrel to check for straightness, burnishing, polishing, and dent removal. The threaded hole on the end will hold accessories, like a flute ragging attachment for easy polishing. Ships in blue protective sleeve.
Our Professional Flute Body Mandrel features the longest shaft length in the industry, with a full 18” working area. It's made from hardened precision ground tool steel. It features a rounded end tip and a threaded hole on the end to hold accessories, like the flute ragging attachment for easy polishing. Secure the mandrel in a vice with the hex stock end for the most reliable grip that gives you 6” to chuck without damaging any of the workable area. A delrin stopper will keep the flute body from going too deep and hitting the hex stock or vice. Use your Professional Flute Body Mandrel for checking straightness, dent work, polishing, and burnishing.
Mandrel Diameter is 0.735 inches (18.69mm) with as radius nose threaded for a 1/4-20 SAE fastener.