Alto Sax Dent Barrel
An deal shape for pushing for rebounding dents out of an alto saxophone body tube.
Machined with smooth radius edges from rust-resistant magnetic stainless steel. Slotted to allow the dent barrel to pass through the neck end of the saxophone without removing the body octave pip or removing the bow.
An deal shape for pushing for rebounding dents out of an alto saxophone body tube.
Machined with smooth radius edges from rust-resistant magnetic stainless steel. Slotted to allow the dent barrel to pass through the neck end of the saxophone without removing the body octave pip or removing the bow. Sized to work in all areas of the body tube, this dent barrel is heavy enough to rebound up pushed in posts but shaped to provide great control in working out smaller dents and creases too. The alto sax dent barrel is a great match with MusicMedic’s 3 foot or 4 foot straight dent rods. 1/2-13 threads are compatible with many other dent removal tools.
- Thread: 1/2-13
- Small diameter: 20.mm (0.785 inches)
- Largest center diameter: 22.8mm (0.897 inches)
- Length: 51mm (2 inches)
- Octave Pip Slot: 6.4mm wide x 3.5mm deep (0.25 x 0.138 inches)